SPIRALCO is a company specialized in the production of spiral weld steel tubes and pipes. Over the years, SPIRALCO has acquired and developed the necessary expertise for the production of high grade spiral weld tubes and pipes to meet the demands and specifications of its customers. Our plants manufacture a wide range of products and focus mainly on the production of tubes and pipes from 16 to 160 inches in nominal diameter with wall thicknesses ranging from 0.180 to 0.750 inches. We have restructured our production lines and made the changes needed to supply tubes and pipes ranging from 20 feet to 100 feet in length. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Tubes and pipes can be finished to your specifications and standards or to any special requirements you might have. Depending on your specifications or special requirements, we are able to run hydrostatic tests on tubes and pipes from 12 inches to 90 inches in diameter and on lengths up to a maximum of 60 feet, depending on the grade and thickness of the steel you need. All the products leaving our two production lines meet the specifications found in the codes and standards governing this type of product, i.e. ASTM (A 252, A 134 and A 139), AWWA (C-200) or ACNOR/CSA (Z 245.1). Moreover, our quality assurance system guarantees you that conformity has been achieved. |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
To
meet your needs, we maintain an inventory of 4000 to 6000 tons of
steel of varying grades and thicknesses, thus making it possible for
us to offer delivery times to customers often under those considered
as standard for the industry.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Home |